-
FDS 1.350
ULTRA-COMPACT MONO AMPLIFIER
The FDS 1.350 is a mono block amplifier specifically designed for handling a subwoofer channel. It has a power of 210 and 350 Watts RMS under 4 and 2 Ohms respectively. In order to configure the system’s bass according to the car’s installation; it is equipped with an active crossover, bass correction and phase adjustment.
- Mono D Class amplifier with dual output
- RCA low-level inputs
- Compact
KEY POINTS
- D Class – Direct Fet ® Technology – Efficient heat dissipation and precision
- Stable under 2 Ohms
- Stackable aluminium chassis with high heat dissipation
- Low noise operational amplifiers New Japan Radio® NJM4580
- Low ESR capacitors – 105°C (220°F)
- Pseudo-balanced inputs
SPECIFICATIONS
- Mono D Class amplifier with dual output
- CEA power (4 Ohms): 1×210 Watts RMS
- Power max (2 Ohms): 1×350 Watts RMS
- Low-pass crossover: 40Hz-400Hz
- Progressive phase adjustment (0-180°)
- Bass boost (0/6dB/12dB)
- Protections: Short circuit / low impedance / Polarity reversal / DC / power drop / heat protection
- Dimensions (LxHxW): 713/16×41/4×111/16 (199x108x43mm)
- Weight: 1.9 lbs
-
FDS 4.350
VERSATILE AND ULTRA-COMPACT
The FDS 4.350 is the 4-channel model (4 x 58 Watts RMS) and the most versatile of the range. It can operate in 4-, 3- or 2-channel mode. In most cases, it will be used to amplify a car’s front and rear speaker drivers. It can also be used to drive front speaker drivers and a small subwoofer, for a small installation which stays simple and integrated.
- 4/3/2-channel D Class amplifier
- RCA low-level inputs
- Compact
KEY POINTS
- D Class – Direct Fet ® Technology – Efficient heat dissipation and precision
- Stable under 2 Ohms
- Stackable aluminium chassis with high heat dissipation
- Low noise operational amplifiers New Japan Radio® NJM4580
- Low ESR capacitors – 105°C (220°F)
- Pseudo-balanced inputs
SPECIFICATIONS
- 4/3/2-channel D Class amplifier
- CEA power (4 Ohms): 4×58 Watts RMS
- Power max (2 Ohms): 4×100 Watts RMS
- Power max (4 Ohms bridged): 2×200 Watts RMS
- Configurable high-pass/low-pass crossover: 40Hz-400Hz
- Full range mode
- Protections: Short circuit / low impedance / polarity reversal / DC / power drop / heat protection
- Dimensions (L x H x W): 713/16×41/4×111/16 (199x108x43mm)
- Weight: 1.9 lbs
-
FPX 4.400 SQ
AUDIOPHILE AND VERSATILE
The FPX 4.400 is a very compact 4-channel amplifier with a power of 4×70 Watts RMS at 4 Ohms. Offering a 4-/3-/2-channel mode, stable at 2 Ohms and equipped with an active crossover for each pair of channels, the FPX 4.400 is the most “sound quality” model in this range. Thanks to its very comfortable power, this is the ideal amplifier for powering front and rear speaker drivers, or for hi-fi installations with a 2-way kit in the front and a subwoofer. The 2-/4-channel input modes ensure compatibility with head units only equipped with a pair output lines. The power and musicality of this amplifier will ensure you get the best out of your high-end speaker drivers from our Performance line.
- 4-/3-/2-channel Class ABD amplifier
- 2-/4-channel input modes
- Stable at 2 Ohms
- Active crossover for each pair of channels
- The FPX 4.400 measures 12 23⁄64 x 6 57⁄64 x 2 1⁄4 ” (314x175x57mm)
KEY POINTS
- AB Class 4/3/2 Channel amplifier – Dedicated to sound quality
- Stable under 2 Ohms
- Audiophile Sanken® Transistors
- High-performance compact heat dissipation chassis
- High power and current dynamic reserve
SPECIFICATIONS
- AB Class amplifier – 4/3/2 channels
- CEA power (4 ohms): 4×70 Wrms
- Maximum power (2 ohms): 4x100Wrms
- Maximum power (bridged 4 ohms): 2x200Wrms
- Bandwidth: 10Hz – 22KHz
- Total harmonic distortion: 0.04%
- SNR (1W/A): >77dBA
- Configurable filters High Pass / Low Pass: 40Hz-5000Hz
- Mirroring Mode: (4CH/2CH)
- Full range function
- Protections: Short circuit / low impedance / reversal of polarity / DC / power drop / heat protection
- Dimensions (LxHxW): 1223⁄64×657⁄64×21⁄4″ (314x175x57mm)
- Weight: 8.16lbs (3.7kg)
-
FPX 1.1000
POWERFUL AND VERSATILE
The FPX 1.1000 is a very compact mono amplifier with a power of 420 Watts RMS at 4 Ohms. Specially designed for powering a subwoofer, this amplifier combines very high power and some great features. Stable at 2 Ohms and 1 Ohm, equipped with a complete range of settings for adjusting low-frequency sensitivity, a remote control and output lines, this amplifier is capable of bluffing performances. Whether it’s for powering an audiophile bass system or a powerful subwoofer, the FPX 1.1000 will meet all your needs for your bass channel.
- Mono Class D amplifier
- Complete range of settings (active crossover, subsonic filter, bass boost, phase control)
- Stable under 2 Ohms and 1 Ohm
- Output lines
- The FPX 1.1000 only measures 1111⁄16 x 513⁄64 x 23⁄32″ (29.7 x 13.2 x 5.3 cm).
KEY POINTS
- D Class Mono amplifier – High power and current dynamic reserve
- Stable under 1 Ohm
- Audio Mos-Fets – Optimized efficiency
- High-performance compact heat dissipation chassis
- Included remote
SPECIFICATIONS
- D Class Mono amplifier
- CEA power (4 ohms): 1×420 Wrms
- Maximum power (2 ohms): 1×700 Wrms
- Maximum power (1 ohm): 1×1000 Wrms
- Bandwidth: 15 Hz – 250 Hz
- Total harmonic distortion: 0.08 %
- SNR (1W/A):> 76 dBA
- Low-pass filter: 50Hz-250Hz
- Subsonic filter: 10Hz-50Hz
- Progressive phase adjustment (0-180°)
- Bass boost (0/12dB)
- Protections: Short circuit / low impedance / reversal of polarity / DC / power drop / heat protection
- Dimensions (LxHxW): 1111⁄16×513⁄64×23⁄32″ (297x132x53mm)
- Weight: 5.62lbs (2.55kg)
-
FPX 4.800
POWERFUL AND VERSATILE
The FPX 4.800 is a very compact 4-channel amplifier with a power of 4×120 Watts RMS at 4 Ohms. Offering a 4-/3-/2-channel mode, stable at 2 Ohms and equipped with an active crossover for each pair of channels, the FPX 4.800 is the most versatile model in this range. Thanks to its very high power, this is the ideal amplifier for powering front and rear speaker drivers, or for hi-fi installations with a 2-way kit in the front and a subwoofer. The 2-/4-channel input modes ensure compatibility with head units only equipped with a pair output lines. The high power and musicality of this amplifier will ensure you get the best out of your high-end speaker drivers from our Performance line.
- 4-/3-/2-channel Class D amplifier
- 2-/4-channel input modes
- Stable at 2 Ohms
- Active crossover for each pair of channels
- The FPX 4.800 measures 921⁄64 x 513⁄64 x 23⁄32″ (23.7 x 13.2 x 5.3 cm).
KEY POINTS
- D class 4/3/2 Channel amplifier
- Stable under 2 Ohms
- Audio Mos-Fets – Optimized efficiency
- High-performance compact heat dissipation chassis
- High power and current dynamic reserve
SPECIFICATIONS
- D Class amplifier – 4/3/2 channels
- CEA power (4 ohms): 4×120 Wrms
- Maximum power (2 ohms): 4x185Wrms
- Maximum power (bridged 4 ohms): 2x370Wrms
- Bandwidth: 10Hz – 20KHz
- Total harmonic distortion: 0.01%
- SNR (1W/A): >76dBA
- Configurable filters High Pass / Low Pass : 50Hz-500Hz
- Bass boost: (0/12dB)
- Mirroring Mode: (4CH/2CH)
- Full range function Protections: Short circuit / low impedance / reversal of polarity / DC / power drop / heat protection
- Dimensions (LxHxW): 921⁄64×513⁄64×23⁄32″ (237x132x53mm)
- Weight: 4.40lbs (2kg)
-
FPX 5.1200
5-CHANNEL AMPLIFIER – 4 X 120 WATTS
5-channel FPX 5.1200 amplifier has a maximum power of 4 x 120 Watt + 1 x 720 Watt at 2 Ohms!
The input selector (2/4/6 channels) duplicates channels, meaning there will always be 5 output channels, even if the head unit only has one or two stereo outputs.
To perfectly tune the subwoofer to the rest of the installation, the bass channel has a low-pass active crossover, a bass equaliser, phase adjustment and a subsonic filter (particularly useful for cutting off frequencies which are too low for a small subwoofer). The remote control enables you to adjust the bass level from the driving seat depending on the type of music you’re listening to.
Stable at 4 and 2 Ohms, this new FPX amplifier will drive most speaker drivers on the market with just the right amount of power: 4 x 75 Watts + 1 x 420 Watts RMS at 4 Ohms (CEA standard). With its power and contained volume, FPX 5.1200 makes the installation easier in order to make the most of your boot space.
- Classe D amplifier
- Input selector (2/4/6 channels)
- Stable under 4 and 2 Ohms
- Adjustable active crossover for each pair of channels
- Dimensions: 13.25″ x 6.8″ x 2.25″ (337 x 175 x 57mm)
KEY POINTS
- D Class amplifier – 5 output channels
- Stable under 2 ohms
- High power and dynamic reserve (1 200W max.)
- Audio Mos-Fets – Optimized efficiency
- Subwoofer remote control supplied
SPECIFICATIONS
- Class D amplifier – 5/4/3 channels
- CEA power (4 ohms): 4 x 75Wrms + 1 x 420Wrms
- Power max (2 ohms): 4 x 120Wrms + 1 x 720Wrms
- Power max (channels 1 to 4 bridged at 4 ohms) + channel 5 at 2 ohms: 2 x 240Wrms + 720Wrms
- Bandwidth: 10Hz – 20kHz
- Total harmonic distortion: < 0.03%
- SNR (1W/A): > 75 dB
- High-Pass / Low-Pass filters channels 1 to 4: 50Hz – 500Hz
- Channel 5 (Subwoofer): Subsonic filter (High-pass) 10Hz – 50Hz +
- Low-pass filter 50Hz – 250Hz
- Channel 5 Bass-Boost : 45Hz / 0 to 12dB
- Phase adjustable from 0 to 180° for channel 5
- Copy mode: (6 CH/4 CH/2 CH)
- Full range mode Protection: Short circuit / low impedance / reverse polarity / DC / power drop / heat protection
- Dimensions (L x H x W): 1317/64″ x 21/4″ x 657/64″ (337 x 175 x 57mm)
- Weight: 9 lbs (4,1kg)