• IROAD X5

    PASSION FOR THE QUALITY

    [FRONT CAMERA] Full HD(1080p)@30fps, 2.0Mega Pixel Image Sensor, 140º

    [REAR CAMERA] Full HD(1080p)@30fps, 2.0Mega Pixel Image Sensor, 140º

    [NIGHT VISION] In parking mode, set automatically brightness 3 times more

    [ADAS] equipped with the Road Safety Warning System that provides audio and visual alerts for Lane Departure (LDWS), Front Collision (FCWS) and Front Vehicle Departure (FVDW)

    [WIFI] Manage your Dash cam with Wi-Fi, view video real-time and download videos on your smart phone with this Mobile App today.

  • IROAD X9

    REMARKABLE FHD

    [FRONT CAMERA] Full HD(1080p)@30fps, SONY STARVIS CMOS Sensor(2.13M), 150º

    [REAR CAMERA] Full HD(1080p)@30fps, SONY Exmor CMOS Sensor(2.0M), 145º

    [X-VISION] Intelligent NIGHT VISION for IROAD

    [ADAS] equipped with the Road Safety Warning System that provides audio and visual alerts for Lane Departure (LDWS), Front Collision (FCWS) and Front Vehicle Departure (FVDW)

    [WIFI] Manage your Dash cam with Wi-Fi, view video real-time and download or delete videos on your smart phone with this Mobile App today.

  • IROAD X10

    UHD 4K RESOLUTION

    [FRONT CAMERA] 4K UHD(3840×2160) @30fps, 8M CMOS Sensor, 165º

    [REAR CAMERA] Full HD(1920×1080) @30fps, SONY Exmor CMOS Sensor(2.0M), 145º

    [OBD SCANNER] OBD Diagnostic Car scanner

    [X-VISION] Intelligent NIGHT VISION for IROAD

    [WIFI] Manage your Dash cam with Wi-Fi, view video real-time and download videos on your smart phone with this Mobile App today.

  • IROAD X11

    QUAD HD RESOLUTION

    [REAR CAMERA] QHD(2560×1440)@30fps , SONY Exmor Starvis Sensor(5.0M) , 155º

    [REAR CAMERA] QHD(2560×1440)@30fps , SONY Exmor Starvis Sensor(5.0M) , 155º

    [REAL HDR] HIGH DYNAMIC RANGE

    [OBD SCANNER] OBD Diagnostic Car scanner

    [X-VISION] Intelligent NIGHT VISION for IROAD

    [WIFI] Manage your Dash cam with Wi-Fi, view video real-time and download videos on your smart phone with this Mobile App today.

  • DST1000DII

    Monoblock Class D Amplifier w/Remote, 1000 Watts

    Small is the new big. That is the DST1000DII. With 1000 watts RMS @ 2 ohms, it can power even the most demanding subwoofer systems. There is an included RLC for adjusting the amount of bass, depending on the type of music being played. The onboard crossover is adjustable from 50-500Hz and the bass EQ circuit is centered at 40Hz, with up to 12dB of boost. The DST1000DII measures just 12.75 x 4.3 inches, extremely small considering its power.

    TECHNICAL DATA:

    Power RMS:

    • 4 ohms: 500 watts x 1

    • 2 ohms: 1000 watts x 1

    Frequency Response:

    S/N Ratio: >79dB

    Damping Factor @ 50Hz 4 ohms: >204

    Distortion (THD): <0.08

    Input Sensitivity:

    • 150mV-3.5V

    • 300mV-7V

    • 1.2V-28V

    Fuse: 90A External

    Remote Level Control (RLC): Included

    Crossover: Low-Pass

    Slope: 12dB/octave

    Frequency:

    • Low-Pass 50-200Hz

    • Sub-Sonic Fixed @ 25Hz/24dB

    Bass Boost: 0-12dB @ 45Hz

    Dimensions: 12.75×4.3×2 inches

  • DST850DII

    Monoblock Class D Amplifier w/Remote, 600 Watts

    It is important to choose the right amplifier when adding subwoofers to an audio system. It isn’t just about having the right power. There is also the question of will it fit in the available space. The DST850DII solves both issues. First, it produces 600 watts RMS @ 2 ohms, more than enough power for most subwoofers. Second, at less than 9 inches long and just over 4 inches wide, it can go just about anywhere. The included RLC allows for fine tuning the bass from the front of the vehicle.

    TECHNICAL DATA:

    Power RMS:

    • 4 ohms: 300 watts x 1

    • 2 ohms: 600 watts x 1

    Frequency Response:

    S/N Ratio @ 1 watt: >79dB

    Damping Factor @ 50Hz 4 ohms: >127

    Distortion (THD): <0.08

    Input Sensitivity:

    • 150mV-3.5V

    • 300mV-7V

    • 1.2V-28V

    Fuse: 45A External

    Remote Level Control (RLC): Included

    Crossover: Low-Pass

    Slope: 12dB/octave

    Frequency:

    • Low-Pass 50-200Hz

    • Sub-Sonic Fixed @ 25Hz/24dB

    Bass Boost: 0-12dB @ 45Hz

    Dimensions: 8.8×4.3×2 inches

  • DST401DII

    4 Channel Class D Amplifier, 480 Watts

    A 4 channel amplifier has to be versatile. It powers the front and rear speakers in a typical audio system. It is used for front speakers and a subwoofer as a popular factory system upgrade. Sometimes it even powers 2 or more subwoofers. The DST401II is up for any of these applications. Its small footprint will fit just about anywhere. But don’t judge its small size. With 480 watts total RMS, there is plenty of power on tap. It’s crossovers and bass boost offer added flexibility.

    TECHNICAL DATA:

    Power RMS:

    • 4 ohms: 75 watts x 4
    • 2 ohms: 120 watts x 4
    • 4 ohms: 240 watts x 2 BTL

    Frequency Response: 20 -20,000Hz

    S/N Ratio @ 1 watt: >86.5dB

    Damping Factor @ 4 ohms: >129

    Distortion (THD): <0.08

    Input Sensitivity:

    • 150mV-1.5V
    • 500mV-5V
    • 1V-10V

    Fuse: 45A External

    Crossover: Hi-Pass and Low-Pass

    Slope: 12dB/octave

    Frequency:

    • Hi-Pass 50-200Hz
    • Low-Pass 50-200Hz

    Bass Boost: 0-12dB @ 45Hz

    Dimensions: 8.8×4.3×2 inches

  • MS650

    6.5” 2-Way Point Source Coaxial Speaker

    TECHNICAL DATA:

    Woofer:

    • Rubber Surround

    • Treated Paper Cone

    • Stamped Frame

    • Gold Plated Terminal w/ Screw Down Connector

    Tweeter:

    • Soft Dome Tweeter

    Diameter: 166mm (6.5”)

    Mounting Depth W: 60.5mm (2.36”)

    Configuration: Coaxial

    Power Handling: 60 Watts RMS

    Freq. Response: 60 – 20,000 Hz

    Impedance: 2.8Ω

    Sensitivity: 88 dB (1watt/1m)

  • SQL650C

    6.5” 2-Way Component System

    TECHNICAL DATA:

    Woofer:

    • Rubber Surround
    • Treated Paper Cone
    • Stamped Frame
    • Gold Plated Terminal w/ Screw Down Connector

    Tweeter:

    • Dual Composite Aluminum + Silk Dome
    • Neodymium Motor

    Crossover:

    • Hi-Pass Only
    • In-line for Easy Install

    Diameter T/W: 56.5mm (2.22”) / 166mm (6.5”)

    Mounting Depth T/W: 15mm (0.59”) / 61.5mm (2.42”)

    Configuration: 2-Way Component System

    Power Handling: 80 Watts RMS

    Freq. Response: 60 – 20,000 Hz

    Impedance:

    Sensitivity: 87 dB (1watt/1m)

  • MT650CII

    6.5” 2-Way Component System

    TECHNICAL DATA:

    Woofer:

    • Rubber Surround
    • Reinforced Composite Paper Cone
    • Custom Tooled Cast Frame
    • Gold Plated Terminal w/ Screw Down Connector

    Tweeter:

    • Dual Composite Aluminum + Silk Dome
    • Neodymium Motor

    Crossover:

    • 2-Way Network
    • Mylar and Poly Capacitors
    • Tweeter Attenuation w/ Jumpers
    • Gold plated terminals for superior connectivity

    Diameter T/W: 44.5mm (1.75”) / 168mm (6.6”)

    Mounting Depth T/W: 12.5mm (0.49”) / 72.9mm (2.87”)

    Configuration: 2-Way Component System

    Power Handling: 80 Watts RMS

    Freq. Response: 50 – 22,000 Hz

    Impedance:

    Sensitivity: 90 dB (1watt/1m)

  • ONYX 16

    ONYX 16 – High-end 165 mm (6.5″) bass/midrange driver with ribbed paper cone, hand-coated fabric dustcap and symmetrical tinsel-lead design with special voice coil ventilation. The extremely torsionally stiff high-end aluminium die-cast basket with optimized ventilation and the strong neodymium magnet with optimized magnetic field symmetry are convincing all along the line. Full control even at high levels: 90/140 W nominal/music power handling, 4 ohms impedance and a characteristic sound pressure of 89 dB speak for themselves! Development and production Made in Germany!

    TECHNICAL DATA

    Bass / midrange 165 mm (6,5″)
    Impedance 4 Ohm
    Nominal / music power 90 / 140 W
    Sound pressure level 89 dB
    Outer diameter 165 mm
    Cut-out diameter 146 mm
    Installation depth 79,5 mm
  • ONYX 80

    ONYX 80 – High-end 80 mm (3″) midrange driver with ribbed paper cone and anodized aluminum dustcap. The powerful neodymium drive in combination with the torsionally stiff high-end aluminum die-cast basket create a midrange experience in a class of its own! The optimized ventilation technology of the specially developed base plate and the revolutionary basket design eliminate airflow noise and allow optimal cooling of the system. This is particularly noticeable at high levels: 88 dB characteristic sound pressure, 4 ohms impedance and a nominal / music power handling of 25 / 40 W speak for themselves! Development and production Made in Germany!

    TECHNICAL DATA

    Midrange 80 mm (3″)
    Impedance 4 Ohm
    Nominal / music power 25/40 W
    Sound pressure level 88 dB
    Outer diameter 94 mm
    Cut-out diameter 77 mm
    Installation depth 42 mm

Main Menu