• POW 20+

    200 mm (8″) 2-way component system with 28 mm (1 1/8″) silk dome tweeter in compact installation dimension with coupling volume. Fiberglass-reinforced 2-layer paper cone with strong ferrite magnet and gloss-turned T-yoke with large core bore. Stiffened, powder-coated metal basket with ventilation and high-quality connection terminals. Tweeter surface-mount and flush-mount enclosure with swivel & pivot function, includes tweeter cable crossover, 3 ohms impedance, nominal/music power handling 80 W RMS/120 W, 94 dB efficiency at 2.83V.

    The new POW+ series impresses with its new CXS28+ tweeter unit: a 28 mm tweeter in the smart installation dimension of a 25 mm tweeter – this means more power in the lower treble range with the same installation dimension! Due to the large 28 mm voice coil in combination with an extremely compact coupling volume, a performance increase in the lower tweeter could be achieved, thus a deeper separation is possible. The new design now has a resonant frequency of 1300 Hz, a full 500 Hz lower than its predecessor! A deep separation in active mode (already from 2.4 kHz/12 dB) are the result, so the woofer / midrange blends even easier with the tweeter unit. For those who need a passive tuning – a tweeter cable crossover consisting of a high-quality film capacitor is included in the set. Manufacture and development Made in Germany!

    TECHNICAL DATA

    Bass-/midrange 200 mm (8“)
    Tweeter 28 mm (1 1/8“)
    Impedance 3 Ohm
    Nominal / music power 80/120 W
    SPL (2.83V/1m) 94 dB
    Outer diameter 208 mm
    Cut-out diameter 177 mm
    Installation depth 68 mm
  • PRO 80

    In the course of the new introduction of the PRO 175 there is now the extension possibility to the 3-way system with the PRO 80 midrange driver. A constant sound characteristic thanks to the hand-coated paper diaphragm and the powerful neodymium magnet. The well-ventilated, powder-coated die-cast aluminium basket ensures optimum cooling. The large pole plate bore provides the drive with additional cooling. The optimised magnetic field symmetry with the powerful drive results in first-class measurement results and a low-distortion, level-resistant mid-range sound, perfectly harmonising with the PRO 175. The space-saving connection terminal with compact and easy-to-install installation dimensions characterises the PRO 80. The MRX-3W crossover set is required for passive operation.

    TECHNICAL DATA

    Nominal power 20 W
    Impedance 4 Ohm
    SPL 88 dB
    Installation depth 33,9 mm
  • PRO 175

    Hand coated, air dried High-End paper cone for powerful and clear sound reproduction. New implemented, air flow optimized, aluminum die-cast baskets make the system more stabile and precise. The new developed 25 mm, hand coated silk dome tweeters generate a soft and clear sounding. New compact, cross-overs brings a perfect sound experience. With the powerful and air flow optimized motor of the system with its ferrite magnet takes the PRO 175 to the top. Get the new legend – out now! Quality made in Germany.

    TECHNICAL DATA

    Nominal power 70 W
    Music power 100 W
    Impedance 4 Ohm
    Crossover frequency 2400 Hz
    SPL 90 dB
    Tweeter outer diameter 40 mm
    Installation depth 66 mm
    Installation diameter 142 mm
  • PRO 16+

    165 mm (6.5″) 2-way component system with 28 mm (1 1/8″) hand-coated silk dome tweeter with coupling volume and reverberant diffusion in a compact installation size. High-end hand-coated paper cone with strong ferrite magnet and gloss-turned T-yoke with large core bore. Powder-coated die-cast aluminum basket with ventilation and high-quality connection terminals. Tweeter surface-mount and flush-mount enclosures with swivel & pivot function, including high-quality cabinet crossovers, 4 ohms impedance, nominal/music power handling 70 W RMS/100 W, 90 dB (1W/m) efficiency.

    This is where the newly developed CXSVC28+ tweeter scores, a tweeter in a class of its own. A plus in performance – with the same size: just as in the POW+ systems, a 28 mm voice coil is found here in the smart installation dimension of a 25 mm tweeter. The small tweeter is a true masterpiece of engineering: noble fabric material, artfully pressed into a dome, hand-coated with a specially developed coating material and a specially developed coating process. The tweeter’s powerful neodymium magnet is surrounded by a newly developed coupling volume with reverberant diffusion. A special damping pad thereby fills the coupling volume and provides the necessary volume despite the extremely small housing. A true masterpiece on the smallest size – the tweeters guarantee the finest nuance imaging, silky and dynamic sound reproduction with an increased omnidirectional and significantly higher level. This allows for a lower crossover frequency and easier connection to the woofer/midrange. The PRO80 midrange driver is recommended to enhance the PRO16+. Manufacturing and development Made in Germany.

    TECHNICAL DATA

    Bass-/midrange 165 mm (6.5“)
    Tweeter 28 mm (1 1/8“)
    Impedance 4 Ohm
    Nominal / music power 70/100 W
    SPL (1w/1m) 90 dB
    Outer diameter 165 mm
    Cut-out diameter 142 mm
    Installation depth 65 mm
  • RSR 80

    RSR 80 – new 8cm midrange   ETON’s new 8 cm midrange turns the RSR 160 into a superb 3-way

    Make three out of two – this could describe simply the possibility that ETON now offers to all sound enthusiasts. With the RSR 80 comes the matching midrange to the powerful RSR 160 system. So the RSR 160 can be upgraded to a 3-way system. The result is even better volume and quality, especially instruments – saxophone, piano-but also voices are reproduced even more lively and vivid. An additional crossover guarantees perfect electrical integration . The extra low mounting depth with 33.8 mm allows mounting practically everywhere with no hassle. Made in Germany the RSR 80 offers an SPL of 87 dB and a resonance frequency 1m/111Hz the ideal addition to enlarge the definition of “perfect”

    TECHNICAL DATA

    DIN – size 3 inch
    Mounting diameter 3,03 inch
    Mounting depth 1,33 inch
    Nominal power handling (all voice coils) 20 W
    Nominal impedance 4 Ohm
    Number of voice coils 1
  • CSR 16

    The newly developed CSR 16, combines the advantages of the RSR and RSE series: The flat, redesigned aluminum die-cast basket gives the system a unique stability, paired with a strong ferrite drive and an optimized ventilation, the result is a system in a class of its own! The shiny turned base plate with the large core bore enables an optimal heat transfer and this without any flow noise! The newly developed 165 mm Carbon-Rohacell glass fiber sandwich cone is light and extremely torsion-resistant, in combination with an inverted aluminum-dustcap perfect for strong kick basses! The fine-resolution 25 mm ceramic-aluminum tweeters with vented coupling volume and RCFS technology (anti-reflection technology), produce the finest, unobtrusive trebles. Thanks to the CSR 16’s newly developed cabinet crossovers, the tweeters blend in perfectly with the bass/midrange drivers. The large 4 ohms voice coil is extremely resilient and will not stop even at high levels! 120 W music power handling and a maximum sound pressure level of 89 dB speak for themselves! The new CSR 16 2-way component system combines fun with sound quality, for all those who like it powerful, dynamic and yet fine-resolution – and all this with a maximum installation depth of just 60 mm – IN SOUND WE TRUST! Production and development Made in Germany.

    To upgrade the CSR 16 to a 3-way system, the RSR 80 midrange driver is required, and for passive operation, the MRX-3W crossover set.

    TECHNICAL DATA

    Bass / midrange 165 mm (6,5″)
    Tweeter 25 mm (1″)
    Impedance 4 Ohm
    Nominal / music power 70 / 120 W
    Sound pressure level 89 dB
    Outer diameter 165 mm
    Cut-out diameter 146 mm
    Installation depth 60 mm
  • RSR 160

    RSR 160 – sound character “extraordinary” ETON’s newest 16 cm compo system ic characterized through many innovations and precise sound character

    The year 2013 can be called the most innovative in ETONs history, because of a matchless reface and modernization of many products. The new RSR 160 compo system is something very unique – the membrane of the woofer consists of a Carbon-Rohacell material mixture, which is built in sandwich construction for incredible enhancement of bass reproduction. Also in the midrange it inspires with its linearized frequency response. The terminals have screw- as well as plug options and a newly designed rubber band protects the strong magnet, which also got developed new and inspires with optimized air flow and enhanced magnet field balance..If the RSR 160 is heard for the first time it is a manifestation. Voices and instruments sound completely present and natural, with lot of pressure and level. The hand-coated silk domes guarantee finest dynamic and constant performance. Even the x overs got optimized and technically enhanced. The RSR 160 stands for sound character made in Germany.

    TECHNICAL DATA

    DIN – size 6,5 inch
    Mounting diameter 5,59 inch
    Mounting depth 2,61 inch
    Nominal power handling (all voice coils) 50 W
    Nominal impedance 4 Ohm
    Number of voice coils 1
  • RSE 80

    The RSE 80 is the expansion to the RSE 160 to 3-way system. With the special designed PSP cone and the strong neodymium-magnet in the high quality aluminum die-cast basket, the RSE 80 ensures a natural and high level stability reproduction. For expansion to 3-way system, the MRX-3W crossovers are needed.

    TECHNICAL DATA

    Midrange 80 mm (3″)
    Impedance 4 Ohm
    Nominal / music power 20 / 30 W
    Sound pressure level 88 dB
    Outer diameter 94 mm
    Cut-out diameter 77 mm
    Installation depth 33,9 mm
  • RSE 160

    The flat paper-foam-paper cone, which is pressed into a sandwich composite material with special embossing, ensures low-resonance, clean and open-sounding midrange reproduction. The flat and extremely powerful ferrite drive with optimised airflow and magnetic field symmetry, in combination with the dual fibre spider, which enables stable and long-term elastic suspension, guarantee a powerful bass. In addition, the RSE 160 features a sturdy, well-ventilated die-cast aluminium basket, a polished pole plate and a 32 mm voice coil.

    The finely drawn 25 mm aluminum-ceramic domes with pan and tilt function for adjusting the dispersion characteristics and the finely wrapped, copper-coated aluminum wire in conjunction with a vented coil enable clearest highs and harmonize perfectly thanks to the specially tuned crossovers. These can be adjusted 3 times in the high frequency range and can be adjusted with a high frequency level adjustment of 0 dB, -3 dB and -6 dB. The crossovers have additional high-quality low-distortion air coils with premium foil capacitors.A high-resolution, fresh and detailed tweeter paired with powerful, dynamic bass and a powerful, voluminous, warm midrange – a system that convinces, not only thanks to its installation-friendly dimensions.

    The RSE 80 is the logical extension to the 3-way RSE system. The paper-foam-paper cone can also be found here. The high-end sandwich cone guarantees consistent sound characteristics, even in 3-way operation. The stiffened, powder-coated and flow-optimized aluminum die-cast basket fits visually to the RSE 160. The powerful neodymium magnet with the optimized magnetic field symmetry and the large core bore, which ensures optimized ventilation and cooling, provides the necessary, level-stable drive. Equipped with easy-to-install connection terminals, flat dimensions and a high degree of efficiency, the RSE 160 is the ideal extension to a 3-way system. The MRX-3W crossover set is required for passive operation.

    Full and warm sound with powerful bass, thanks to the new developed PSP cone. A strong motor with reinforced aluminum die-cast basket brings you a natural, highly loadable reproduction. The 25 mm ceramic-aluminum tweeter delivers clear heights and harmonize perfectly due to the special designed crossovers. Incl. flush and surface mounts with integrated swivel function. Development and production Made in Germany.

    TECHNICAL DATA

    Bass / midrange 165 mm (6,5″)
    Tweeter 25 mm (1″)
    Impedance 4 Ohm
    Nominal / music power 70 / 120 W
    Sound pressure level 89 dB
    Outer diameter 165 mm
    Cut-out diameter 146 mm
    Installation depth 60 mm
  • MAS 80

    MAS 80 – realization of perfection ETON’s new 8cm midrange turns the MAS 160 into a 3 way system of its own class

    Music lovers have a very distinct imagination of the ideal combination of loudspeakers in their vehicle. With the new MAS 80 midrange these dreams can now be realized. A new, hand-coated Hexacone membrane cares for transparent sound, the new soft dustcap guarantees midrange/tweeter reproductions without any resonances. Also the magnet had been optimized and now has a powerful neodyme gear. The aluminium basket assures finest ETON converting and stability.

    TECHNICAL DATA

    DIN – size 3 inch
    Mounting diameter 3,03 inch
    Mounting depth 1,33 inch
    Nominal power handling (all voice coils) 20 W
    Nominal impedance 4 Ohm
    Number of voice coils 1
  • MAS 160

    MAS 160 – the follower of a true legend   ETON’s latest 16 cm compo system is the follower of one of the best 16cm systems of all times. Many acoustic improvements as well as optical advancements make the MAS 160 an exceptional compo system

    One of the best and most popular systems ETON had ever developed was the Adventure A1 160. Therefore it was a big challenge to produce a follower that should not just keep up regarding acoustics and power , but even outperform.Many did not believe this to be possible, was the Adventure A1 160 one of the most mounting-friendly and most powerful systems ever.But the bavarian company invented the MAS 160, a system that can not just keep up with the legend, but even has the features to outstrip it. The subwoofer has a new magnet with large aeration, optimized ventilation and better max excursion.The new HEX membrane guarantees better SPL and even a higher quality compared to the Adventure. New terminals with screw- and plug function as well as consequent ETON branding (magnet rubber cap with logo, dust cap with logo) give the MAS 160 the distinctive look SPL 1W/1m 89dB is the “punch” that the MAS 160 inherited from the Adventure. Clearest reproduction, especially of high frequences ensures the tweeter with coated Keronite/Magnesium membrane. The crossover was also improved for the optimiztion of sound and ideal mounting.

    TECHNICAL DATA

    DIN – size 6,5 inch
    Mounting diameter 5,59 inch
    Mounting depth 2,06 inch
    Nominal power handling (all voice coils) 70 W
    Nominal impedance 4 Ohm
    Number of voice coils 1
  • FDS 1.350

    ULTRA-COMPACT MONO AMPLIFIER

    The FDS 1.350 is a mono block amplifier specifically designed for handling a subwoofer channel. It has a power of 210 and 350 Watts RMS under 4 and 2 Ohms respectively. In order to configure the system’s bass according to the car’s installation; it is equipped with an active crossover, bass correction and phase adjustment.

    • Mono D Class amplifier with dual output
    • RCA low-level inputs
    • Compact

     

    KEY POINTS

    • D Class – Direct Fet ® Technology – Efficient heat dissipation and precision
    • Stable under 2 Ohms
    • Stackable aluminium chassis with high heat dissipation
    • Low noise operational amplifiers New Japan Radio® NJM4580
    • Low ESR capacitors – 105°C (220°F)
    • Pseudo-balanced inputs

     

    SPECIFICATIONS

    • Mono D Class amplifier with dual output
    • CEA power (4 Ohms): 1×210 Watts RMS
    • Power max (2 Ohms): 1×350 Watts RMS
    • Low-pass crossover: 40Hz-400Hz
    • Progressive phase adjustment (0-180°)
    • Bass boost (0/6dB/12dB)
    • Protections: Short circuit / low impedance / Polarity reversal / DC / power drop / heat protection
    • Dimensions (LxHxW): 713/16×41/4×111/16 (199x108x43mm)
    • Weight: 1.9 lbs

Main Menu